3-D-18-HZ Approved with Conditions

WORK ON MAIN HOUSE BLOCK
The fiberglass shingle siding will be removed and the old wood lap siding restored. The front has shake siding in the gable and sawn wood vent which will be repaired and restored. The front porch will be restored with beadboard ceiling, and the non-original metal scrollwork supports and balustrade will be replaced with turned wooden posts to match the engaged post existing on the house and a turned balustrade to match that of the adjacent north sister house (but with 1.85" balusters.) Additionally, both front and rear doors are fiberglass and would be replaced by solid wood half-lite doors, Woodgrain model 567, which approximates style of the retained interior doors and matches the adjacent north sister house.

WORK ON REAR ADDITION
Replace existing 26"x52" metal windows in the rear porch enclosure with 4 double-hung 1/1 wood windows at 26"x58" to create a sunporch appearance (Jeld Wen W-2500). Replacement back door to be full wood half-lite. An additional window is proposed on the western side of the enclosure-- a wood casement window (Jeld Wen W-4500) with a 1/1 appearance at approximately the same dimrensions of the other proposed windows and sized to meet egress requirements. The beadboard wainscotting on the bottom portion of the porch would be 1x6 nominal size with each strip actually being 2'-6". Conditions for approval are a section detail through the proposed wooden trim on the wainscot on the rear to be provided to show the relationship of the trim to the beadboard below and the horizontal wood siding above; and 2) The final porch support design be approved by staff and be similar to the existing engaged post and, 3) that the original brick for the main block of the house may be repaired as necesssary but not be painted or parged.