1-D-16-HZ Approved

Canopy
A low-slope matte-finish metal canopy is proposed on the building originally addressed as 14 Market Square. This canopy will have round tie-backs connecting to a new steel beam at the face of the building below the transoms.
A new sloped matte-finish metal awning is proposed on the building originally addressed 12 Market Square. This awning will slope to cover existing wood transom panels which will be painted. A 2-inch reveal will be retained in the continuous metal valance at the junction of the awning at Building 12 and the canopy at Building 14. The valance be of continuous size, color, and material. Condition that awning tiebacks are not more than 1-1/2" inches thick. If the engineering calculations indicate that a greater thickness is needed, then the awning and tiebacks will be required to be reviewed by staff for any mitigating measures.

Signage
A new sign is proposed to attach to the low-slope canopy. The cut-metal letters are freestanding (not attached to a sign board) and the lower case letters are approximately 10.5" high with portions of the upper case letters extending to a maximum of 18" high. that awning tiebacks are not more than 1-1/2" inches thick. If the engineering calculations indicate that a greater thickness is needed, then the awning and tiebacks will be required to be reviewed by staff for any mitigating measures.

12-f-15-hz Approved with Conditions

Approval of installing two 3'-0" doors with glass above and wooden panels below within the left storefront window opening,retaining the transom. The center section of the two new door frames together would total 9 inches. Approval adding new concrete step at new doors to match the existing step. Denial of dividing the single-paned right storefront window with the installation of a center mullion. The approved storefront configuration is depicted on drawings entitled "Double Door Options" submitted to the Historic Zoning Commission on 2/4/2016.