6-A-15-HZ Approved with conditions

Level l repairs:
1. Repair of deteriorated brick foundation walls after removal of concrete porch. Use historic mortar recipe (9:2:1)
2. Repair damaged siding and replace rotten or missing siding with wood siding to match. Paint entire exterior and add aluminum gutters.

Level II changes:

1. Remove concrete porch floor and fdn. and replace with new wood porch floor (framing and tongue & groove decking) on new CMU foundation piers with painted parge coat (see phase 1). Piers and floor framing to be built to accommodate construction of porch roof (see Phase 2 dwgs).
2. Porch posts: two 8x8 chamfered wooden posts and two pilasters against the front façade.
3.Porch railing: install 2x2 square balusters with a molded top rail with the spacing between balusters being 3 inches.
4.Porch skirt area: install wooden lattice installed so that the lattice strips run parallel and perpendicular to the porch floor, rather than on the diagonal.
5.Porch roof: full-façade hipped with asphalt shingle covering.
6. Wrap non-original square back porch columns with wood fascia (see Phase 1 dwgs) so that they are no larger than 6x6, and add treated wood trellis for climbing plants (see exterior views).
7. Replace non-original double-hung windows with wood double-hung . Add appropriate window casing (see submitted drawings) (Phase 1dwgs).
8. Replace front door with wood half-lite door with 2 vertical or horizontal wood panels below (see Phase 1 dwgs).

6-D-15-HZ Approved as Modified

Construct 8' x12' frame side-gabled shed on masonry piers. Cladding to be engineered composite panels with 2-inch battens applied over the vertical reveals to appear as board and batten sheathing. Entry door with board and batten to be centered on side. Shed to be situated with a 5-foot setback from the north side lot line and 48 feet from the rear lot line. Side gabled roof to have a 8/12 roof pitch and to be sheathed in asphalt shingles. Lattice work is to fill in between the foundation piers. Roof is also approved as a hipped roof. Vertical reveals on composite sheathing panels to be approximately 12-inches on-center.