Subdivision

Concept Plan

8-SG-01-C

Recommended for approval
by the Planning Commission

APPROVE variances 1 - 8 because of topography, and the proposed variances will not create a traffic hazard.
APPROVE the Concept Plan subject to 13 conditions


See case notes below

Details

Request

Property Info

Case Notes

What's next?

Details of Action

+
1. Meeting all applicable requirements of the Knox County Health Department.
2. Provision of street names which are consistent with the Uniform Street Naming and Numbering System for Knox County (County Ord. 91-1-102).
3. Removal of vegetation along Kodak Rd. to allow for the required sight distance.
4. Prior to final plat approval, the applicant's surveyor must certify the required sight distance at the Kodak Rd. entrance to this development.
5. On the final plat, include the 50' to centerline dedication of right-of-way along Kodak Rd.
6. Meeting all applicable requirements and obtaining all required permits from the Tenn. Dept. of Environment and Conservation (TDEC) and Tennessee Valley Authority (TVA).
7. On the final plat, identify sight distance easements across Lots 6, 7 and 113.
8. Traffic calming measures will be required for the major streets and shall be addressed at the design plan phase for the subdivision pursuant to the Knox County Dept. of Engineering and Public Works requirements.
9. There shall be no grading or site alteration in the hatchered contour (sinkhole) area of the recreational area.
10. Details for the access easement (typical section and width) shall be provided at the Design Plan phase.
11. Meeting all applicable requirements of the Knox County Dept. of Engineering and Public Works.
12. Meeting all requirements of the approved use on review development plan.
13. A final plat based on this concept plan will not be accepted for review by MPC until certification of design plan approval has been submitted to MPC Staff.

Applicant Request

+
Subdivision
River Island Subdivision
Lots
209 (Split)
Proposed Density
0.998 du/ac

Variances

1. Intersection grade variance on Road B at Road A, from 1% to 2%.
2. Intersection grade variance on Road E at Road A, from 1% to 2%.
3. Intersection grade variance on Road C at Road B, from 1% to 2%.
4. Intersection grade variance on Road M at Road B, from 1% to 2%.
5. Intersection grade variance on Road L at Road C, from 1% to 2%.
6. Vertical curve variance on Road J at station 7+25, from 225' to 135'.
7. Horizontal curve variance on Road L at station 4+00, from 250' to 200'.
8. Broken back tangent length variance on Road B at station 23+00, from 150' to 66.5'


Property Information

+
Location
South side of Kodak Rd., east of Kelly Ln.

Commission District 8


Size
209.32 acres

Sector
East County

Currently on the Property
Vacant land and agricultural

Growth Plan
Rural Area

Case Notes

+
Staff Recommendation
APPROVE variances 1 - 8 because of topography, and the proposed variances will not create a traffic hazard.

APPROVE the Concept Plan subject to 13 conditions

1. Meeting all applicable requirements of the Knox County Health Department.
2. Provision of street names which are consistent with the Uniform Street Naming and Numbering System for Knox County (County Ord. 91-1-102).
3. Removal of vegetation along Kodak Rd. to allow for the required sight distance.
4. Prior to final plat approval, the applicant's surveyor must certify the required sight distance at the Kodak Rd. entrance to this development.
5. On the final plat, include the 50' to centerline dedication of right-of-way along Kodak Rd.
6. Meeting all applicable requirements and obtaining all required permits from the Tenn. Dept. of Environment and Conservation (TDEC) and Tennessee Valley Authority (TVA).
7. On the final plat, identify sight distance easements across Lots 6, 7 and 113.
8. Traffic calming measures will be required for the major streets and shall be addressed at the design plan phase for the subdivision pursuant to the Knox County Dept. of Engineering and Public Works requirements.
9. There shall be no grading or site alteration in the hatchered contour (sinkhole) area of the recreational area.
10. Details for the access easement (typical section and width) shall be provided at the Design Plan phase.
11. Meeting all applicable requirements of the Knox County Dept. of Engineering and Public Works.
12. Meeting all requirements of the approved use on review development plan.
13. A final plat based on this concept plan will not be accepted for review by MPC until certification of design plan approval has been submitted to MPC Staff.
Disposition Summary
APPROVE variances 1 - 8 because of topography, and the proposed variances will not create a traffic hazard.
APPROVE the Concept Plan subject to 13 conditions

Details of Action
1. Meeting all applicable requirements of the Knox County Health Department.
2. Provision of street names which are consistent with the Uniform Street Naming and Numbering System for Knox County (County Ord. 91-1-102).
3. Removal of vegetation along Kodak Rd. to allow for the required sight distance.
4. Prior to final plat approval, the applicant's surveyor must certify the required sight distance at the Kodak Rd. entrance to this development.
5. On the final plat, include the 50' to centerline dedication of right-of-way along Kodak Rd.
6. Meeting all applicable requirements and obtaining all required permits from the Tenn. Dept. of Environment and Conservation (TDEC) and Tennessee Valley Authority (TVA).
7. On the final plat, identify sight distance easements across Lots 6, 7 and 113.
8. Traffic calming measures will be required for the major streets and shall be addressed at the design plan phase for the subdivision pursuant to the Knox County Dept. of Engineering and Public Works requirements.
9. There shall be no grading or site alteration in the hatchered contour (sinkhole) area of the recreational area.
10. Details for the access easement (typical section and width) shall be provided at the Design Plan phase.
11. Meeting all applicable requirements of the Knox County Dept. of Engineering and Public Works.
12. Meeting all requirements of the approved use on review development plan.
13. A final plat based on this concept plan will not be accepted for review by MPC until certification of design plan approval has been submitted to MPC Staff.

What's next?

+
After the Planning CommissionAppeals of Concept Plans and Final Plats are filed with Chancery CourtThe Process
Applicant

River Island Subdivision

Gregory M. Layman


Case History