Subdivision

Concept Plan

4-SA-10-C

Recommended for approval
by the Planning Commission

APPROVE variances 1-8 because the site has a limited amount of frontage on Buffat Mill Rd. and the proposed variance will not create a traffic hazard

APPROVE the concept plan subject to 13 conditions


Details

Request

Property Info

What's next?

Details of Action

+
1. Meeting all applicable requirements of the Knoxville Department of Engineering
2. Provision of the required right-of-way dedication on both Buffat Mill Rd. (35') and McIntyre Road (25') as called for in section 62-10 of the Subdivision Regulations.
3. Certification on the final plat by the applicant's engineer that there is 300' of sight distance in both directions on Buffat Mill Rd. at the intersection with the proposed Road K. as required in section 62-88 of the Subdivision Regulations.
4. Provision of a 35' intersection radius on both sides of Buffat Estates Bv. at Buffat Mill Rd. as called for in the traffic impact study if permitted by the Knoxville City Engineer.
5. Provision of a 5' wide sidewalk with a 2' planting strip on one side throughout all the streets. Extending the proposed sidewalk to Monte Vista Rd.
6. Adding a note on the final plat that if any building construction is proposed within the 50' setback area around the sinkholes, a geotechnical report must be prepared by a registered engineer to determine soil stability, and that report must submitted to the Knoxville Department of Engineering for consideration and approval. Engineered footings may be required for these areas. Construction of dwellings is not permitted within the closed contour of the sinkhole/depression.
7. Meeting all applicable requirements and obtaining all permits from the Tennessee Dept. of Environment and Conservation if any are required.
8. Connection to sanitary sewer and meeting all other applicable requirements of the Knox County Health Dept.
9. Provision of street names which are consistent with the Uniform Street Naming and Addressing System within Knoxville ( Ord. 0-280-90).
10. Place a note on the final plat that all lots will have access to the internal street system only
11. Certification of participation in KUB's sewer capacity reservation program.
12. Development will be required to modify the concept plan to remove the need of the horizontal curve variance at sta. 20+00 from 175' radius to 250' radius.
13. Provide Traffic Calming meeting the requirements of the City of Knoxville Department of Engineering.

Applicant Request

+
Subdivision
Buffat Mill Estates
Lots
241 (Split)
Proposed Density
3.23 du/ac
Residential?
Yes - SF

Variances

1. Horizontal curve variance from 250' to 125' at sta. 9+00 of Road N
2. Horizontal curve variance from 250' to 125' at sta. 25+50 of Road K
3. Horizontal curve variance from 250' to 200' at sta. 12+50 of Road N
4. Vertical curve variance from 87.8' to50' at sta. 13+95 of Road F
5. Vertical curve variance from 91' to 55' at sta. 15+00 of Road F
6. Vertical curve variance from 465.5' to 285' at sta. 8+65 of Road N
7. Vertical curve variance from 162.75' to 100' at sta. 5+50 of Road K
8. Vertical curve variance from 275' to 165' at sta. 24+70 of Road K


Property Information

+
Location
South side of Buffat Mill Rd., north side of McIntyre Rd.

Council District 4


Size
74.72 acres

Sector
East City

Currently on the Property
Vacant land

Growth Plan
Urban Growth Area (Inside City Limits)

What's next?

+
After the Planning CommissionAppeals of Concept Plans and Final Plats are filed with Chancery CourtThe Process
Applicant

Buffat Mill Estates

Clayton Bank & Trust


Case History