Subdivision

Concept Plan

10-SB-16-C

Recommended for approval
by the Planning Commission

APPROVE variances 1- 5 because the site's topography restricts compliance with the Subdivision Regulations, and the proposed variances will not create a traffic hazard.
APPROVE the Concept Plan subject to 12 conditions:


See case notes below

Details

Request

Property Info

Case Notes

What's next?

Details of Action

+
1. Connection to sanitary sewer and meeting any other relevant requirements of the Knox County Health Department.
2. Provision of a subdivision name and street names which are consistent with the Uniform Street Naming and Addressing System within Knox County (County Ord. 91-1-102)
3. Conducting a stream determination study and providing the appropriate easements and buffers as required by the Knox County Department of Engineering and Public Works
4. Certification prior to final plat approval by the applicant's surveyor that the corner sight distance at the proposed intersection of Road A and W. Emory Rd. meets or exceeds the requirements of the Subdivision Regulations
5. As part of the design plan provide a grading plan to the Knox County Dept. of Engineering and Public Works that specifically addresses access and the proposed building sites for lots 1-3 and 40-42
6. Meeting all applicable requirements and obtaining all required permits from the Tennessee Department of Environment and Conservation
7. Obtaining a street connection permit from the Tennessee Department of Transportation.
8. Place a note on the final plat that all lots will have access only to the internal street system
9. Prior to final plat approval, record a line of sight easement across Lot 28 in order to provide the needed sight distance for the curve in Road A if required by the Knox County Dept. of Engineering and Public Works
10. Meeting all other applicable requirements of the Knox County Dept. of Engineering and Public Works
11. Prior to certification of the final plat for the subdivision, establishing a property owners association that will be responsible for maintenance of the joint permanent easements, common area, recreational amenities and drainage system.
12. A final plat application based on this concept plan will not be accepted for review by the MPC until certification of design plan approval has been submitted to the MPC staff.

Applicant Request

+
Subdivision
Oakland, LLC on W. Emory
Lots
42 (Split)
Proposed Density
2.99 du/ac
Residential?
Yes - SF

Variances

1. Horizontal curve radius from 250' to 100' at sta 6-75 of Road A
2. Horizontal curve radius from 250' to 135' at sta 9+25 of Road A
3. Horizontal curve radius from 250' to 100' at sta 12+25 of Road A
4. Intersection spacing variance between the proposed subdivision entrance (Road A) and Meadow Creek Ln. from 400' to 172'
5. Intersection spacing variance between the proposed subdivision entrance (Road A) and Chartwell Rd. from 400' to 309'


Property Information

+
Location
Northwest side of W. Emory Rd., southwest of Chartwell Rd.

Commission District 6


Size
14.06 acres

Sector
Northwest County

Currently on the Property
Detached dwellings & vacant land

Growth Plan
Planned Growth Area

Case Notes

+
Staff Recommendation
APPROVE variances 1- 5 because the site's topography restricts compliance with the Subdivision Regulations, and the proposed variances will not create a traffic hazard.


APPROVE the Concept Plan subject to 12 conditions:

1. Connection to sanitary sewer and meeting any other relevant requirements of the Knox County Health Department.
2. Provision of a subdivision name and street names which are consistent with the Uniform Street Naming and Addressing System within Knox County (County Ord. 91-1-102)
3. Conducting a stream determination study and providing the appropriate easements and buffers as required by the Knox County Department of Engineering and Public Works
4. Certification prior to final plat approval by the applicant's surveyor that the corner sight distance at the proposed intersection of Road A and W. Emory Rd. meets or exceeds the requirements of the Subdivision Regulations
5. As part of the design plan provide a grading plan to the Knox County Dept. of Engineering and Public Works that specifically addresses access and the proposed building sites for lots 1-3 and 40-42
6. Meeting all applicable requirements and obtaining all required permits from the Tennessee Department of Environment and Conservation
7. Obtaining a street connection permit from the Tennessee Department of Transportation.
8. Place a note on the final plat that all lots will have access only to the internal street system
9. Prior to final plat approval, record a line of sight easement across Lot 28 in order to provide the needed sight distance for the curve in Road A if required by the Knox County Dept. of Engineering and Public Works
10. Meeting all other applicable requirements of the Knox County Dept. of Engineering and Public Works
11. Prior to certification of the final plat for the subdivision, establishing a property owners association that will be responsible for maintenance of the joint permanent easements, common area, recreational amenities and drainage system.
12. A final plat application based on this concept plan will not be accepted for review by the MPC until certification of design plan approval has been submitted to the MPC staff.
Disposition Summary
APPROVE variances 1- 5 because the site's topography restricts compliance with the Subdivision Regulations, and the proposed variances will not create a traffic hazard.
APPROVE the Concept Plan subject to 12 conditions:

Details of Action
1. Connection to sanitary sewer and meeting any other relevant requirements of the Knox County Health Department.
2. Provision of a subdivision name and street names which are consistent with the Uniform Street Naming and Addressing System within Knox County (County Ord. 91-1-102)
3. Conducting a stream determination study and providing the appropriate easements and buffers as required by the Knox County Department of Engineering and Public Works
4. Certification prior to final plat approval by the applicant's surveyor that the corner sight distance at the proposed intersection of Road A and W. Emory Rd. meets or exceeds the requirements of the Subdivision Regulations
5. As part of the design plan provide a grading plan to the Knox County Dept. of Engineering and Public Works that specifically addresses access and the proposed building sites for lots 1-3 and 40-42
6. Meeting all applicable requirements and obtaining all required permits from the Tennessee Department of Environment and Conservation
7. Obtaining a street connection permit from the Tennessee Department of Transportation.
8. Place a note on the final plat that all lots will have access only to the internal street system
9. Prior to final plat approval, record a line of sight easement across Lot 28 in order to provide the needed sight distance for the curve in Road A if required by the Knox County Dept. of Engineering and Public Works
10. Meeting all other applicable requirements of the Knox County Dept. of Engineering and Public Works
11. Prior to certification of the final plat for the subdivision, establishing a property owners association that will be responsible for maintenance of the joint permanent easements, common area, recreational amenities and drainage system.
12. A final plat application based on this concept plan will not be accepted for review by the MPC until certification of design plan approval has been submitted to the MPC staff.

What's next?

+
After the Planning Commission
Because of its location in the County, appeals will be heard by Knox County Chancery Court.
Appeals of Concept Plans and Final Plats are filed with Chancery CourtThe Process
Applicant

Oakland, LLC on W. Emory

Oakland, LLC


Case History