1. Meeting all applicable requirements of the Knox County Dept. of Engineering and Public Works
2. Widen Harmon Rd. to a minimum paved width of 20'. This road widening is to be done prior to or in conjunction with the development of any portion of this site. Road widening plans must be reviewed and approved by the Knox County Dept. of Engineering and Public Works before any construction begins on this project
3. All retaining walls greater than 4' in height must be designed by a registered engineer
4. Note on the plan that all intersection grades up to 3% have been approved by the Knox County Dept. of Engineering and Public Works
5. Certify 300' of sight distance in both directions at the Harmon Rd. entrance and at all three driveway entrances to the condominiums
6. Place a note on the final plat that lots 1-17 & 37 will have access from the internal street system to Arthur Harmon Rd. only
7. Note on the plan the required 56' right-of-way dedication from the center line of E. Governor John Sevier Hwy.
8. Connection to sanitary sewer and meeting all other applicable requirements of the Knox County Health Dept.
9. Provision of street names which are consistent with the Uniform Street naming and Addressing System in Knox County (Ord. 91-1-102)
10. Meeting all applicable requirements and obtaining all required permits from the Tenn. Dept. of Environment and Conservation
11. A final plat application based on this concept plan will not be accepted for review by the MPC until certification of design plan approval has been submitted to the MPC staff.

Staff Recommendation

APPROVE the concept plan subject to 11 conditions

---

1. Meeting all applicable requirements of the Knox County Dept. of Engineering and Public Works
2. Widen Harmon Rd. to a minimum paved width of 20'. This road widening is to be done prior to or in conjunction with the development of any portion of this site. Road widening plans must be reviewed and approved by the Knox County Dept. of Engineering and Public Works before any construction begins on this project
3. All retaining walls greater than 4' in height must be designed by a registered engineer
4. Note on the plan that all intersection grades up to 3% have been approved by the Knox County Dept. of Engineering and Public Works
5. Certify 300' of sight distance in both directions at the Harmon Rd. entrance and at all three driveway entrances to the condominiums
6. Place a note on the final plat that lots 1-17 & 37 will have access from the internal street system to Arthur Harmon Rd. only
7. Note on the plan the required 56' right-of-way dedication from the center line of E. Governor John Sevier Hwy.
8. Connection to sanitary sewer and meeting all other applicable requirements of the Knox County Health Dept.
9. Provision of street names which are consistent with the Uniform Street naming and Addressing System in Knox County (Ord. 91-1-102)
10. Meeting all applicable requirements and obtaining all required permits from the Tenn. Dept. of Environment and Conservation
11. A final plat application based on this concept plan will not be accepted for review by the MPC until certification of design plan approval has been submitted to the MPC staff.

---

Disposition Summary

APPROVE the concept plan subject to 11 conditions

---

Details of Action

1. Meeting all applicable requirements of the Knox County Dept. of Engineering and Public Works
2. Widen Harmon Rd. to a minimum paved width of 20'. This road widening is to be done prior to or in conjunction with the development of any portion of this site. Road widening plans must be reviewed and approved by the Knox County Dept. of Engineering and Public Works before any construction begins on this project
3. All retaining walls greater than 4' in height must be designed by a registered engineer
4. Note on the plan that all intersection grades up to 3% have been approved by the Knox County Dept. of Engineering and Public Works
5. Certify 300' of sight distance in both directions at the Harmon Rd. entrance and at all three driveway entrances to the condominiums
6. Place a note on the final plat that lots 1-17 & 37 will have access from the internal street system to Arthur Harmon Rd. only
7. Note on the plan the required 56' right-of-way dedication from the center line of E. Governor John Sevier Hwy.
8. Connection to sanitary sewer and meeting all other applicable requirements of the Knox County Health Dept.
9. Provision of street names which are consistent with the Uniform Street naming and Addressing System in Knox County (Ord. 91-1-102)
10. Meeting all applicable requirements and obtaining all required permits from the Tenn. Dept. of Environment and Conservation
11. A final plat application based on this concept plan will not be accepted for review by the MPC until certification of design plan approval has been submitted to the MPC staff.